Breaking 2001 fjs 600

Hi guys i just bought another silverwing to break for parts its been in storage colour is NH411 met silver its running and driving also the panels on it are very good few scratches but an easy touch up job if you need anything get back to me

what about footboard undertray ? goes from bottem of radiator to front of engine at rear of footboards, also what about handlebar cover ? How worn is front disc ?

Hi Phil I'm looking for the adjustable pad that goes behind your bum on the seat mine has a cut in it.

There might be a buyer for the fork springs, there's a lad on the Muppets that recently bought a used Silver Wing that has HyperPro fork springs fitted and he really dislikes them. He was asking round if any Silver Wing owners had a OE set he could buy.

I would like to see the clutch bell please.

Mine is scored beyond repair although I'm having to ride the bike anyhow.

Do you have the tool to remove it? and if so, could you take pics?. That would be a real improvement for my 2001 SW.

Also, how are the brake discs? oh, and the RH side handlebar cover?

Please let me know

Thanks

Hi siataukreg,

I could do with a pair or forks as long as they're in good nick. Both my seals have gone and one slider is quite badly scored. Not sure on the other one but the seal has gone.

Oh, and the variator cover? I managed to crack mine after dropping the SWing 15 miles after buying it!

Cheers,

Rog

[quote="phils a winger"]what about footboard undertray ? goes from bottem of radiator to front of engine at rear of footboards, also what about handlebar cover ? How worn is front disc ?[/quote
Hi i have the undertray, handlebar covers are sold, disc is no use

HORNBLOWER wrote:

Hi Phil I'm looking for the adjustable pad that goes behind your bum on the seat mine has a cut in it.

Goes with the seat £50 plus post

DodgetheRog wrote:

Hi siataukreg,

I could do with a pair or forks as long as they're in good nick. Both my seals have gone and one slider is quite badly scored. Not sure on the other one but the seal has gone.

Oh, and the variator cover? I managed to crack mine after dropping the SWing 15 miles after buying it!

Cheers,

Rog

Not sure on the forks yet i only removed the plastics today and i only have the front part of the trans. cover rear is damaged

Loosebearing wrote:

I would like to see the clutch bell please.

Mine is scored beyond repair although I'm having to ride the bike anyhow.

Do you have the tool to remove it? and if so, could you take pics?. That would be a real improvement for my 2001 SW.

Also, how are the brake discs? oh, and the RH side handlebar cover?

Please let me know

Thanks

I dont have the tool to pull the drum off I do have one on another engine that came out of a 2007 scoot not sure on its condition, discs are no good and handlebar covers are sold
I can have a go at removing the drum I do have a small puller but dont know if it will fit it

siataukreg wrote:

DodgetheRog wrote:

Hi siataukreg,

I could do with a pair or forks as long as they're in good nick. Both my seals have gone and one slider is quite badly scored. Not sure on the other one but the seal has gone.

Oh, and the variator cover? I managed to crack mine after dropping the SWing 15 miles after buying it!

Cheers,

Rog

Not sure on the forks yet i only removed the plastics today and i only have the front part of the trans. cover rear is damaged

OK, forks are more important to me at the mo.

Thanks for that siatuakreg.

Could you post a pic of the 2007 drum that you have? As long as there are no signs of scoring, it should be OK.

If not, maybe you could try to get the other one off using your puller although I've heard that regular pullers may distort the bell/drum.

What do you think?

BTW siataukreg,

Do you have the front pulley 'outer plate'? Is it nice and 'smooth'?

how much including postage for the undertray ?

Loosebearing wrote:

Thanks for that siatuakreg.

Could you post a pic of the 2007 drum that you have? As long as there are no signs of scoring, it should be OK.

If not, maybe you could try to get the other one off using your puller although I've heard that regular pullers may distort the bell/drum.

What do you think?

looked at the drum today it is scored so probably no use

phils a winger wrote:

how much including postage for the undertray ?

Tenner plus post £3 should cover it 07989473455

DodgetheRog wrote:

siataukreg wrote:

DodgetheRog wrote:

Hi siataukreg,

I could do with a pair or forks as long as they're in good nick. Both my seals have gone and one slider is quite badly scored. Not sure on the other one but the seal has gone.

Oh, and the variator cover? I managed to crack mine after dropping the SWing 15 miles after buying it!

Cheers,

Rog

Not sure on the forks yet i only removed the plastics today and i only have the front part of the trans. cover rear is damaged

OK, forks are more important to me at the mo.

No obvious leaks from forks few rust spots high up not in the working area still on the bike at the mo

Thanks for that, do you use papypal if so will txt you. Just to confirm this is the piece that fits under the footboards from radiator to engine.

phils a winger wrote:

Thanks for that, do you use papypal if so will txt you. Just to confirm this is the piece that fits under the footboards from radiator to engine.

Yes paypal is ok its the bit with the louvres in it secure with two bolts to lower frame

http://www.ebay.co.uk/itm/201972035697?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Ebay link lots of stuff being listed

siataukreg wrote:

DodgetheRog wrote:

siataukreg wrote:

DodgetheRog wrote:

Hi siataukreg,

I could do with a pair or forks as long as they're in good nick. Both my seals have gone and one slider is quite badly scored. Not sure on the other one but the seal has gone.

Oh, and the variator cover? I managed to crack mine after dropping the SWing 15 miles after buying it!

Cheers,

Rog

Not sure on the forks yet i only removed the plastics today and i only have the front part of the trans. cover rear is damaged

OK, forks are more important to me at the mo.

No obvious leaks from forks few rust spots high up not in the working area still on the bike at the mo

Had a good look at the forks they look good to me none abs type i would take £75 for the pair plus post (still on the bike as yet) i will hold them for you if you want 07989473455 cheers Ronnie

Ronnie, no its not the radiator cover its the under tray beneath the footboards Im looking for

phils a winger wrote:

Ronnie, no its not the radiator cover its the under tray beneath the footboards Im looking for

yes the one runs from bottom of radiator towards the engine covers bottom of fuel tank has some louvres in it

listed loads of parts on ebay last night wheels with good hoops on them front and rear calipers all good engine compete with trans forks now sold

siataukreg,

Could you have alook at 'the other' clutch bell? I really need this part. Hope you can help.

Loosebearing wrote:

siataukreg,

Could you have alook at 'the other' clutch bell? I really need this part. Hope you can help.

Thats listed on ebay as a complete engine and trans

Engine is going complete with injection air box starter motor all sensors only thing you would use from your old engine will be the Mtg bolts £250

siataukreg wrote:

DodgetheRog wrote:

siataukreg wrote:

DodgetheRog wrote:

Hi siataukreg,

I could do with a pair or forks as long as they're in good nick. Both my seals have gone and one slider is quite badly scored. Not sure on the other one but the seal has gone.

Oh, and the variator cover? I managed to crack mine after dropping the SWing 15 miles after buying it!

Cheers,

Rog

Not sure on the forks yet i only removed the plastics today and i only have the front part of the trans. cover rear is damaged

OK, forks are more important to me at the mo.

No obvious leaks from forks few rust spots high up not in the working area still on the bike at the mo

Forks are now off the scoot and so is everything else down to bare frame