Which OEM wires do I use?

Subject: Which OEM wires do I use? Wed Nov 30, 2011 11:08 pm

I want to hook up a Knight Riderz" LED sequential/brake light but need to know what OEM colored wire to attach the LED wires to. The instructions say:

black wire to ground.....(presumable another black wire).
Blue wire to "running light power source"
Red wire to "brake light power source"

I tried the search and see that several of you have hooked this LED bar up but didn't see any mention of which OEM wires were used

Any help will be appreciated.

Subject: Re: Which OEM wires do I use? Wed Nov 30, 2011 11:24 pm

ulflyer wrote:: I want to hook up a Knight Riderz" LED sequential/brake light but need to know what OEM colored wire to attach the LED wires to. The instructions say:

black wire to ground.....(presumable another black wire).
Blue wire to "running light power source"
Red wire to "brake light power source"

I would strongly suggest DennisB's Perfect Connector which would plug into the under rear left corner 6 pin connector with 5 wires

G (Green) - Frame Ground
Lb (Light Blue) - Right Rear Turn Signal
Orange (Orange) - Left Rear Turn Signal
G/Y (Green/Yellow) - Brake lights
Bl/Br (Black/Brown) - Running Lights

Subject: Re: Which OEM wires do I use? Wed Nov 30, 2011 11:26 pm

Subject: Re: Which OEM wires do I use? Wed Nov 30, 2011 11:39 pm

For new members; The items Dennis makes can be found in Dennis' Shop on the Forum page (blue box at top of page). I hope he's still making them because he has had many good reviews. I'd post a link, but I don't know how. He also has pictures. Those I understand. Smile

Subject: Re: Which OEM wires do I use? Wed Nov 30, 2011 11:46 pm

Subject: Re: Which OEM wires do I use? Thu Dec 01, 2011 2:18 am

I just got an Admore light bar and will install as soon as I receive my perfect connector. Dennis was going to start until at least the first. Have to wait till SWing is back from first service anyway. Dealer got bought out do they moved locations. Hope they call tomorrow, not riding's killing me.

Subject: Re: Which OEM wires do I use? Thu Dec 01, 2011 7:24 am

Many thanks for the info. Will take a hard look at the location of the wires today and decide which way I want to attach them.

Subject: Re: Which OEM wires do I use? Thu Dec 01, 2011 10:43 am

I installed my Admore light-bar using Dennis's connector - piece of cake! cheers

Pictures of the wiring I did are in my album.

Subject: Re: Which OEM wires do I use? Thu Dec 01, 2011 11:39 am

DennisB's Perfect Connector is the way to go. No cutting of the OEM harness required.

https://www.silverwing600.com/t1564-things-i-manufacture-and-sell

Only $32.00 USD delivered to your door (in US) and is absolutely plug-n-play!

Subject: Re: Which OEM wires do I use? Fri Dec 02, 2011 1:30 pm

not high jacking your thread
bit i PMd dennis but not heard back from him been good few days
is he a busy guy or am i best to PM him again?
thanks

Subject: Re: Which OEM wires do I use? Fri Dec 02, 2011 1:33 pm

You might want to email him. Dennis has been quiet lately.

Subject: Re: Which OEM wires do I use? Fri Dec 02, 2011 4:51 pm

I got an email from Dennis yesterday. He's sending out a connector for me on Saturday.

Subject: Re: Which OEM wires do I use? Fri Dec 02, 2011 5:06 pm

I just spoke to Dennis and told him he is in demand. He should check the forum soon and get his messages.

Subject: Re: Which OEM wires do I use? Sat Dec 03, 2011 12:14 pm

jdeereanton wrote:: I just spoke to Dennis and told him he is in demand. He should check the forum soon and get his messages.

dennis PMdme back so thanks for that Cool