I don't suppose anybody has come by this info. I didn't find it in my service manual. I need it as part of my cruise control installation. Otherwise it will be through trial and error.

Thanks,
jesse

VSS = Vehicle Speed Sensor.

I don't know for the bikes, but for Honda automobiles 4,000 is pretty standard.

I saw that too in the Rostra manual, Thank you.

If the reluctor is part of the rear wheel pulser ring, you could calculate the VSS pulses /mile. As you're an engineer I don't need to tell you about the math, but I will anyway.
1 mile X 5280 ft X 12 " = 63360 ".
Measure the radius, double to get the diameter, of the pulser ring in inches. Calculate the circumference of the pulser ring C= 3.1416 X D
Divide 63360 by the C of the ring. Divide again by the number of teeth on the sensor ring.
There's your answer. If the VSS doesn't use the rear pulser ring then this exercise was a waste of time.

The VSS doesn't use the ABS ring, it uses a different ring that I don't have the specs on. but I thank you for the input.

jesse

As I thought, this exercise was a waste of time.