garmin gps ram mount

hi all from the uk can someone help please i would like to mount my garmin zumo on the silverwing question is how and where? also where do i get power from ( eg where to tap into a feed, next question hot grips where can i take a feed from so they power when the bike starts up,
also h d i lights are they a easy mod or a waste of time thanks in advance

adammetselaar wrote:

can someone help please i would like to mount my garmin zumo on the silverwing question is how and where?

I liked how the mount that DennisB was made and looked, so I purchased from him. I liked the thought of the center mounted GPS.

http://silverwing600.forumotion.com/silver-wing-links-for-parts-and-accessories-f6/custom-gps-mount-for-honda-silverwing-reflex-t67.htm?highlight=ram+mount

adammetselaar wrote:

also where do i get power from ( eg where to tap into a feed

Here is how I did it
http://silverwing.org/cgi-bin/topic_show.pl?pid=12960#pid12960

I wanted a design where I could continually add more without any additional wiring AND without limiting what I can or will do.
In fact I am now have heated clothing that I run without any problems.

adammetselaar wrote:

also h d i lights are they a easy mod or a waste of time thanks in advance

Here are my comments
http://silverwing.org/cgi-bin/topic_show.pl?pid=20659#pid20659

If you decide on the HID lights I would highly recommend http://www.ddmtuning.com/ddmhidkits.html which is what I have. They have a lifetime warranty on the ballast and bulbs.

Another option would be to go with a three point mounting system.

This is that I did for my 03 swing. I made another one for my 08. The one for my 08 uses stainless steel screws.









I went with a three point system because I tend to give everythig I do some extra overkill.

I ran the power to the cigarette lighter that I installed in the glovebox.

Well thats an option for one of your questions....

Have a great day
bob