Every Silverwing I have ever worked on and removed the front fairing with all the lights, Had one 9 pin plug with 6 wires that disconnected the the fairing lights. Simple and straight to the point. On a 2009 up is there more then one light disconnect plug. Can someone scan in the front of the scooter schmatic and PM it to me. ABS please.

Thank You.

If i should sent it, i need a email adress.
Otherwise i also can post it here but i dont know your laws of copyright...

Btw, i only have the 2003 Model, if you need another wiring ou may have to wait for another...

Thanks Blackfly but it looks like Honda changed something on the 2009 model and did not tell any of us. So if any one has a 2009 shop manual, could you please look and see if the schematic has changed from 2008 to 2009 on the front lights connector.

If you scan it in and make a JEP. file, you can paste it to a PM so I can see it.

Thank You

Dennis my manual 02-09 hasn't got the changes shone for the 09 yet.The label for 2002-2009 is label tape.Inside on the first page date of issue is Oct.2007 so it is jest relabeled.Must not have been informed of the changes to the 09.??

Hi Roger, Thanks for looking. The problem I ran into is that there are 2 connectors in the front of the 2009 Silverwing that have 9 pins. One has 6 wires and is the correct connector to install my power wire brake out Pigtail connector. The other 9 pin connector is for...I just don't know, but it has 3 wires going through it.

Just for your information, 2002 thru 2008 Silverwings only have 1 connector with 9 pins behind the front fairing.