Wiring for LED lights on a GIVI Top Case

Subject: Wiring for LED lights on a GIVI Top Case Sun Jan 31, 2010 10:04 am

First, DennisB the perfect connector and GPS mount work wonderfully. Second, jeffp if you sent a replay to me I did not receive it. So now to the question. has anyone wired there GIVI Top Case for LED lights and if you have where and how did you run the wire from case to the electrical connection? Thanks.

Guest

I did send a reply. Anyway, my Givi topcase is not wired for lights but maybe in the future.

Subject: Re: Wiring for LED lights on a GIVI Top Case Sun Jan 31, 2010 10:56 am

Thanks Ralph,

I'm very happy to hear you like the Silverwing stuff.

Does your top box have a hole in the bottom for the purpose of running your wiring through?

I have thoughts about a good way to get it done. Let me know.

Subject: Re: Wiring for LED lights on a GIVI Top Case Sun Jan 31, 2010 4:09 pm

justputzn wrote:

So now to the question. has anyone wired there GIVI Top Case for LED lights and if you have where and how did you run the wire from case to the electrical connection?

http://silverwing.org/cgi-bin/topic_show.pl?pid=12960

One of the last pictures shows the underneath wiring route.

I drilled through the aluminum wing near the hinge.

I rotozipped a shallow slot in the bottom of the Givi-SR19 for the wiring path.

I also used Posi-Lock connectors to allow quick connect/disconnect for future assembly/disassembly.

_________________
Bill - Georgetown TX 07 Silver Wing ABS

Clearview w/vent, Givi E96/TB19/E52 with Admore Lighting, Alaskan Leather, Wrist Rests, 3M Solas tape, K&N air, Hyperpro spring, Grip Puppies, Airhawk, Utopia backrest, Stebel, Apexcone HIDs, StingerZ LEDs (w/Backoff WigWag), Knight Rider Sequential LED, NGK Iridium, Power Commander III, Manic Salamander, Saeng mirrors, Garmin Zumo 660, Dark-Side Sumitomo Tire

Subject: Re: Wiring for LED lights on a GIVI Top Case Sun Jan 31, 2010 6:03 pm

Bill, Thanks for all the hard work...but the thread to the .org sight does not work. You might think about moving the information to this sight in the future.

Subject: Re: Wiring for LED lights on a GIVI Top Case Sun Jan 31, 2010 6:25 pm

DennisB wrote:

the thread to the .org sight does not work.

That is surprising ... I just tried the link and it worked. Does it require an authentication to view it??

DennisB wrote:

You might think about moving the information to this sight in the future.

I will have to wait till I have more free time.

_________________
Bill - Georgetown TX 07 Silver Wing ABS

Clearview w/vent, Givi E96/TB19/E52 with Admore Lighting, Alaskan Leather, Wrist Rests, 3M Solas tape, K&N air, Hyperpro spring, Grip Puppies, Airhawk, Utopia backrest, Stebel, Apexcone HIDs, StingerZ LEDs (w/Backoff WigWag), Knight Rider Sequential LED, NGK Iridium, Power Commander III, Manic Salamander, Saeng mirrors, Garmin Zumo 660, Dark-Side Sumitomo Tire

Subject: Re: Wiring for LED lights on a GIVI Top Case Sun Jan 31, 2010 8:06 pm

Bill, I just found out what the problem was...A person needs to be loged in on that sight to see the information.

» Lotito wins Ledesma case
» Warn 2.5ci Winch Wiring Diagrams
» 1991 - NO reverse lights?
» Advantage of riding with two sets of lights
» 6n2 lights to 6n wire loom

Wiring for LED lights on a GIVI Top Case

Wiring for LED lights on a GIVI Top Case

Similar topics

Similar topics